Step 2
Position the table-leg assembly over the pre-drilled holes Attach the assembly to the table with eight Allen bolts.

Step 3
Tilt up the base frame such that the gusset plate holes line up with the four holes in the base of each of the table legs. Attach the base to the legs using eight Allen bolts

Step 4
Attach the pin connectors to the top of each table leg as shown.

Step 6
Tilt the table up onto its casters.

Step 7
After removing the base from the monitor, position the monitor on the tilting monitor platform. Use the provided Velcro strap to attach the monitor to the platform. Make sure the front of the monitor is securely positioned against the front brakes.