|
Model 200 -
height adjustable workstation. Ideal for work in a supine
position in a bed, for sitting, standing of working
from a recliner.
Model 200
(Shown with optional LCD arms.)
Model 200 Dimensions and Product Details:
Tabletop: 18" x 34" 1 1/2"
(medium density fiberboard with laminated top and
rubber t-mold edge)
Base Footprint: 24" x 36" ("H" shaped base fabricated from 1.5" x
2.5" square steel tube, 1/*' wall, painted.)
Casters: 2.5" (Rubber , welded to base)
Tabletop Height Range: 33" - 52" (measured from floor to top surface
of tabletop)
Adjustable CPU Rack: Like Model 300
Keypad: Like Model 300
Power Strip: Grounded, 4-outlet strip
Motorized Legs: Like Model 300
Monitor Platform: Model 200 does not have a
tilting monitor platform and for supine use is recommended only with a flat
panel monitor.
Specifics on operation.
1. The adjustable keyboard tray tilts and pivots by
tightening and pivots by tightening and loosening the thumb nuts on the
bottom of the tray.
2. The mouse tray rotates about its mounting point. It tilt
adjusts by tightening and loosening the tension handle. The tray rides on a
track underneath the tabletop, allowing the tray to face the user wit the
table leg on the right or left.
3. The motorized table leg raises and lowers the tabletop,
keyboard tray and monitor. It is controlled by a simple up/down switch
Velcro mounted, allowing the user to mount the switch on either side of the
tabletop.
4. Users may place their monitor on the laminated tabletop
where it will sit directly above your keyboard. Both CRT or flat panel
monitors may be so accommodated.
5. The power strip is mounted below the tabletop.
6. Casters allow easy unit movement from room to room or,
for example, over a bed.
7. Printers or scanners are usually position on the
tabletop to the side of the monitor.
ErgoQuest
Accessories Page
|
|
