| New Model 500R1.
Designed for the specific
needs of the radiology professional. This model
has all the features of the ErgoQuest 500 with special options.
1. Work Surface: durable 1.5" thick medium
density board with black laminate and rubber-molded edge.
2. Keyboard tray and arm: Spring loaded sleeves adjust in width to
accommodate a variety of keyboards. Mechanism has two pivot points, allowing
the tray to tilt through 90 degrees and provide a range of positions for use
in a reclined mode.
3. Power strip. Has 6 grounded outlets with a 12 foot grounded cord
and plug. Strip can be mounted on either side.
4. Motorized legs: raise and lower table to and up to 400 lbs. of
equipment from 31 to 50 degrees with the push of a button, for use in sit,
stand, or recline position with minimal effort.
5. 5" Casters: Heavy-duty, ball bearing casters with elastomeric
wheels to provide smooth movement. Front two casters are locking.
6. Keypad: provides push button controls of the motorized legs and
monitor tilt platform.
7. Motorized monitor tilt platform: tilts monitors weighing up to 150
lbs. from 0 to 55 degrees for comfortable use in many positions including
supine work. Also accommodates LCD monitors.
8. Cord management grommets: two 3" diameter holes with plastic
grommets provide power strip access below the tabletop.
9. Powder-Coated Steel Tube: The 2" diameter steel tube frame
eliminates a need for cross members beneath the work surface. They provide
maximum clearance for recliners, beds and wheelchairs. Durable finish
resists scratching.
10. Zero Gravity Recliner also available. Call.
Dimensions of the new
unit.
-
ErgoQuest™ Articulating
Frame-Mounted Platform (EQ-AFMP-2) with steel mounting clamp, steel arm,
steel tray base, and 13“ x 21“ acrylic tray with 1“ lip.
Tray rotates 360 degrees and tilts +/- 15 degrees. Entire platform
rotates 270 degrees about its clamp mount. Mounting hardware is
included. Black finish.
- ErgoQuest™ Adjustable, Articulating,
Frame-Mounted Rack (EQ-AAFMR) with steel mounting clamp, steel arm, and
adjustable steel frame. Frame rotates 260 degrees, tilts +/- 15
degrees, opens from 17“ to 32“ (left to right) and 15“ to 26“
(top to bottom). Load capacity is 165 pounds. Black finish.
- 14" x 17" X-Ray Illuminator (P-XRI) with
spring-loaded film retention clip.
- ErgoQuest™ Flexible arm, low voltage task light
(EQ-F-ALVTL-1) with mounting clamp, 20" flexible arm, and MR16
bulb.
- ErgoQuest™ Frame-Mounted Halogen Uplight
(EQ-FMHU) with 150 watt halogen bulb provides a complete range of
ambient illumination levels to suit every lighting preference.
Dimmable with remote handset. Black finish
- ErgoQuest™ Motorized monitor positioning system
(EQ-MMPS) with 48" mounting track, 3 sliding transits, and 3LCD
mounts with horizontal and vertical pivots. Central Actuator moves the
mounting track forward and backward through a range of 12". When
used in combination with the tilting platform, the entire positioning
system rotates forward, and backward through range of 55 degrees.
Fixed-mount keypad control. Optional remote control with memory
preset.
- ErgoQuest™ Articulating, Table-Mounted Platform
(EQ-AATMP) with 10“ ball bearing track mount, steel arm, and multiple
pivot points. Track mount provides forward and backward movement
through 10“. Heavy duty joints at both ends of arm provide 180
degrees horizontal pivot, 180 degrees vertical pivot, and 270 degrees
rotation. Platform is powder coated mdf with padded wrist rest.
Black finish.
- ErgoQuest™ Keyboard-Mounted Dictation Tray
(EQ-KTMDT) with non-skid rubber sides and bottom. Provides convenient
storage for dictation hand set. Grey plastic finish.
|
|
