The Fluid chair on line owners manual.

Headrest, Lumbar and Armrest Adjustments

1. Headrest adjustment (optional) Pull up or push down on headrest pad.

2. Lumbar adjustments (optional). To adjust up or down the lumbar support. to adjust in and out: Pull the lumbar support pad towards your back. It will click in four positions to reach the maximum setting. Note: The lumbar support twill only ratchet inward. To reset and move the pad to its original position, pull the lumbar support all the way forward until it clicks to release the support.

3. Armrest adjustment. Push button on side of arm in to allow you to move armrest up or down. When at desired height, release button.

Synchro-Mechanism Adjustments:

1. Seat depth adjustment. (optional). Turn level clockwise to unlock slide. Once seat is adjusted to desired depth, turn lever counter-clockwise and raise body weight from chair. Sea will spring back into rearward-most position. Turn lever clockwise to lock.

2. Seat height adjustment and tilt lock. Seat height. Lift lever to adjust up or down. Tilt lock: Turn lever clockwise to unlock synchro-movement. Turn lever counter-clockwise to lock synchro movement.

3. Tilt tension adjustment. From the forward tilt position rotate lever to increase or decrease tension. Clockwise give more tension and counter-clockwise for less. Note: Tilt tension will NOT adjust i the tilted back position.

Seating solutions: how to use your new fluid chair for most comfort.

For Lower Back Pain or Discomfort

. Adjust back height so that lumbar area of chair fits into the curve of your lower back.

. Lumbar area of the back may not be supported properly. Angle back rest forward or try tilting the seat pan.

. Lower the seat height so that feet are flat on the floor and supporting the weight of the lower portion of the legs.

Discomfort in the buttocks and back of thighs.

. Adjust chair height so that the legs are not dangling. Make sure that the chair is not too low. If the angle of the

knee bend is too large, the weight of the body will be transferred to the seat pan surface causing discomfort in

the buttocks and back of the thighs.

For pain in the shoulders and arms

. Raise or lower arm rests so that arms are resting comfortably on work surface. Shoulders should not be hunched.

Allseating 10 Year Warranty

GENERAL GUARANTEE: Allseating products are guaranteed against defect for 10 years from date of the invoice. This guarantee covers materials and workmanship on frames, bases, controls, cylinders and Allseating carded upholstery materials under normal use 8 hours per day, 5 days per week. Products under normal use 24 hours per day, 7 days per week will be guaranteed under the same terms and conditions for 3 years from date of the invoice. Normal wear and tear is not covered. Allseating's warranty applies to catalogue items only.

Safe product use. Casters: Allseating chairs are shipped standard with casters for carpet flooring, unless otherwise specified at time of order. A chair with carpet casters will move too freely on a hard surface and could result in injury to the occupant. Please insure you have the correct casters for your floor surface.

Mechanism: Keep children away from moving parts of the chair. Serious injury could result.

Operation: Do not operate chair functions unless seated.

Fluid chair mesh colors

For prices and to order on line

Prices for 
items on 
this page

Office Organix ^{TM
Phone: 800-569-9236  Phone: 401-821-6922
Fax: 401-821-0111}
E-Mail: Office Organix
© 1997-1998, Office Organix^tm - all rights reserved
Products and prices subject to change without notice.